Courses

BIM Management diploma Group50

BIM Management diploma Group50
500 USD 250 USD
Accepted Payment Methods
  Buy Now
Lessons
722 Lessons in 27 Chapters
Duration
70 Hours & 8 Minutes
Students
202 Students in 17 Countries
Instructor
Selim Badwy BIM Manager


  لمعرفة موعد الكورس والخصومات المتاحة 
تواصل مع
Wa.me/201020819686
  • المحتوي التفصيلي لدوره البيم ( حضور في القاهره - مدينه نصر / تفاعلي علي زوم )
  • بعد اصدار بيان قوات المسلحه بأنها سوف لا تعتمد اي مخططات غير بصيغه الريفيت 
  • و بما ان معظم مشاريع الان تحت سيطره الهيئه الهندسيه للقوات المسلحه 
  • فأصبح لا مجال للعمل الا بتعلم البيم و اتقان اهم ادواته وهو الريفيت 
  • البرامج التي نتعامل معها في الكورس 
  • - يتم العمل علي برامج 
  • 1- الاتوكاد 
  • 2-الريفيت المعماري 
  • 3-الريفيت الانشائي 
  • 4-النافيس ورك
  • 5-البريمافيرا
  • 6-الدينامو 
  • الكورس عباره عن شرح تطبقي علي مشروع من اول محاضره 
  • يحصل المتدريب علي 4 شهادات من شركه اتوديسك وشهاده من شركه كيان للاستشارات الهندسيه 
  • لمن هذا الكورس 
  • 1- مهندسي المكتب الفني الانشائين والمعماريين 
  • 2- حديثي التخرج 
  • 3- مهندسي الموقع ليكون الخطوه القادمه هي العمل بمظومه تعمل بالبيم 
  • يؤهلك الكورس العمل كــــ 
  • 1-مهندس مكتب فني بيم 
  • 2-بيم كوردناتور 
  • 3-مهندس تخطيط 
  • 4- المكاتب الاستشارية التي تعمل بالبيم 
  • مدير نمذجه البيم بعد عدد من سنوات الخبره 
  • عدد ساعات الكورس : 100 ساعه مقمسه علي 25 محاضره 
  • يتم تسليم التاسك المطلوب منك قبل بدايه المحاضره والمناقشه مع المحاضر في الوقت المتاح للاسئله 
  • لمزيد من التفاصيل يرجي التواصل معنا بالظبط علي معرفه المزيد 
Course Curriculum
  Expand All     Collapse All
Chapter 01 - Lecture 125 Lessons
 2:12:00
01-01 - What Is BIM Theoretical?
 0:16:00
01-02 - What Is BIM Application?
 0:20:00
01-03 - BIM WorkFlow VS CAD WorkFlow
 0:03:00
01-04 - الكورس ده لمين
 0:08:00
01-05 - البرامج
 0:03:00
01-06 - مخرجات الكورس
 0:07:00
01-07 - تقسيمه الدبلومه
 0:02:00
01-08 - تفصيله كل قسم في الكورس
 0:03:00
01-09 - Q and A1
 0:06:00
01-10 - Q and A2
 0:02:00
01-11 - Q and A 3
 0:03:00
01-12 - Q and A4
 0:04:00
01-13 - Q and A5
 0:05:00
01-14 - Q and A6
 0:05:00
01-15 - Q and A7
 0:01:00
01-16 - Q and A8
 0:07:00
01-17 - Q and A9
 0:07:00
01-18 - Q and A10
 0:02:00
01-19 - Q and A11
 0:04:00
01-20 - Q and A12
 0:05:00
01-21 - التسطيب
 0:04:00
01-22 - نماذج المهندسين
 0:07:00
01-23 - Q and A13
 0:02:00
01-24 - Q and A14
 0:03:00
01-25 - Q and A15
 0:03:00
Chapter 02 - Lecture 226 Lessons
 1:51:00
02-01 - Lecture2 Introduction
 0:06:00
02-02 - Open Project
 0:06:00
02-03 - Revit Interface
 0:01:00
02-04 - Use Mouse
 0:05:00
02-05 - Create Wall
 0:02:00
02-06 - Apply Wall
 0:04:00
02-07 - معطلات الرسم
 0:08:00
02-08 - Wall Instance Properties
 0:08:00
02-09 - Grids
 0:06:00
02-10 - Cont. Grids
 0:06:00
02-11 - Apply Grids
 0:02:00
02-12 - الغياب وتعديل الاسماء
 0:04:00
02-13 - Level
 0:04:00
02-14 - Cont. Levels
 0:04:00
02-15 - Apply Level
 0:02:00
02-16 - Create Floor
 0:04:00
02-17 - Floor Opening
 0:05:00
02-18 - Depression In Floor
 0:04:00
02-19 - Conclusion
 0:02:00
02-20 - Start New Project
 0:06:00
02-21 - Wall Location
 0:05:00
02-22 - Wall – Floor Modeling
 0:09:00
02-23 - طريقة المذاكرة و متابعه الفيديوهات
 0:01:00
02-24 - Save Project
 0:04:00
02-25 - Renumber Grids
 0:01:00
02-26 - Q And Answer – Girds in Elevation
 0:02:00
Chapter 03 - Lecture 319 Lessons
 2:00:00
03-01 - Open Project
 0:04:00
03-02 - Modify 1
 0:11:00
03-03 - Modify 2
 0:10:00
03-04 - Modify 3
 0:09:00
03-05 - Modify 4
 0:13:00
03-06 - Modify 5
 0:11:00
03-07 - Q And A Pick Wall
 0:03:00
03-08 - Instance Parameters Floor
 0:03:00
03-09 - Underlay
 0:06:00
03-10 - Ceiling
 0:05:00
03-11 - Cont. Ceiling
 0:09:00
03-12 - Attache Wall
 0:03:00
03-13 - Section BOX
 0:03:00
03-14 - Complex Ceiling
 0:09:00
03-15 - Lighting on Ceiling
 0:06:00
03-16 - Roof
 0:06:00
03-17 - Cont. Roof
 0:06:00
03-18 - Task 2,3
 0:02:00
03-19 - Q and A Grids
 0:01:00
Chapter 04 - Lecture 424 Lessons
 2:12:00
04-01 - Lecture Introduction
 0:02:00
04-02 - Roof by Extrusion
 0:10:00
04-03 - Other roof Shapes
 0:02:00
04-04 - Roof Assignment
 0:05:00
04-05 - Roof Shapes samples
 0:11:00
04-06 - Roof by Modify Sub element Floor
 0:10:00
04-07 - Roof by Modify Sub element Roof
 0:06:00
04-08 - Sloping Roof in Site
 0:04:00
04-09 - Sloping Roof
 0:15:00
04-10 - Roof edges construction
 0:03:00
04-11 - Roof Facia – Sofit
 0:06:00
04-12 - Profile
 0:04:00
04-13 - Gutter
 0:02:00
04-14 - Note on Gutter
 0:01:00
04-15 - Revit Option
 0:10:00
04-16 - Project -Levels
 0:04:00
04-17 - Project Grids
 0:04:00
04-18 - Floors
 0:05:00
04-19 - Walls
 0:04:00
04-20 - Opening in Wall
 0:09:00
04-21 - Landscape
 0:05:00
04-22 - Planting
 0:05:00
04-23 - Roof
 0:02:00
04-24 - Task
 0:03:00
Chapter 05 - Lecture 523 Lessons
 2:08:00
05-01 - Lecture Introduction
 0:03:00
05-02 - By Face
 0:07:00
05-03 - Shaft
 0:07:00
05-04 - Wall Opening
 0:03:00
05-05 - Vertical Opening
 0:03:00
05-06 - Dormer
 0:11:00
05-07 - Apply Dormer
 0:04:00
05-08 - Revit Library
 0:09:00
05-09 - Q and A Revit Library
 0:02:00
05-10 - Hide and Isolate
 0:07:00
05-11 - Material Essential
 0:09:00
05-12 - Revit Hierarchy
 0:09:00
05-13 - Q and A Revit Hierarchy
 0:09:00
05-14 - Q and A Revit types
 0:03:00
05-15 - Loadable VS System Family
 0:01:00
05-16 - Curtain Wall type Parameters
 0:08:00
05-17 - Curtain Wall Instance Parameters
 0:05:00
05-18 - Curtain Grids
 0:04:00
05-19 - Curtain Mullion
 0:08:00
05-20 - Louver Overview
 0:03:00
05-21 - Create Louver Wall
 0:04:00
05-22 - Cont. Louver
 0:07:00
05-23 - Task -اختياري
 0:02:00
Chapter 06 - Lecture 626 Lessons
 1:46:00
06-01 - Curtain Wall Corner
 0:06:00
06-02 - Curved Curtain Wall
 0:09:00
06-03 - Structure task Analysis
 0:13:00
06-04 - Stacked Wall
 0:08:00
06-05 - Stacked Wall
 0:05:00
06-06 - Q and A Curtain Wall
 0:03:00
06-07 - Tapered Wall
 0:06:00
06-08 - Curtain Panel
 0:01:00
06-09 - Q and A wall Join
 0:02:00
06-10 - Cont. Curtain Panel
 0:02:00
06-11 - Architecture Task
 0:02:00
06-12 - Start Structure Project
 0:03:00
06-13 - Structure Floor
 0:02:00
06-14 - Cont. Structure Floor
 0:05:00
06-15 - Structure Wall
 0:03:00
06-16 - Structure Column
 0:06:00
06-17 - Cont. Structure Floor
 0:04:00
06-18 - Slanted Column
 0:04:00
06-19 - Structure Level
 0:01:00
06-20 - Structure Level range
 0:02:00
06-21 - Structure Fram
 0:03:00
06-22 - Structure Fram and Column Connection
 0:02:00
06-23 - Cont. Structure Beam
 0:03:00
06-24 - Beam Geometry
 0:06:00
06-25 - Beam Constraints
 0:04:00
06-26 - What’s is Next
 0:01:00
Chapter 07 - Lecture 724 Lessons
 1:50:00
07-01 - View Types in Revit
 0:04:00
07-02 - Opening in Beams
 0:05:00
07-03 - Stair Beam
 0:05:00
07-04 - Arch Beam
 0:04:00
07-05 - Waffle Slab Intro
 0:04:00
07-06 - Waffle Slab Modeling
 0:06:00
07-07 - Q and A Waffle Salb
 0:03:00
07-08 - Beam System
 0:07:00
07-09 - Beam System Advanced
 0:07:00
07-10 - Arch Floor
 0:04:00
07-11 - Saw tooth Floor
 0:08:00
07-12 - Clarification for structure Engineers
 0:03:00
07-13 - Isolated Footing
 0:05:00
07-14 - Instance parameters Isolated Footing
 0:04:00
07-15 - Workflow in Isolated Footing
 0:03:00
07-16 - Combined Footing
 0:03:00
07-17 - Raft Foundation and Elevator Submit
 0:08:00
07-18 - Retaining Wall Foundation
 0:06:00
07-19 - Cont. Retaining Wall Foundation
 0:03:00
07-20 - Round Structure Column
 0:04:00
07-21 - Pile Caps
 0:06:00
07-22 - Change Steel behavior to Concreate
 0:01:00
07-23 - Raft On Piles
 0:06:00
07-24 - Task - اختياري
 0:01:00
Chapter 08 - Lecture 824 Lessons
 2:48:00
08-01 - Lecture Intro
 0:03:00
08-02 - Join Priority
 0:15:00
08-03 - Slanted Column With Floor
 0:06:00
08-04 - Secant pile
 0:11:00
08-05 - Sheet Pile
 0:03:00
08-06 - Q And A semels and struts
 0:01:00
08-07 - And A Reveal Hidden Elements
 0:02:00
08-08 - Q And A General
 0:15:00
08-09 - Drop slab – Column Cap
 0:08:00
08-10 - Structure Task Analysis
 0:16:00
08-11 - Cont. Structure Task Analysis
 0:24:00
08-12 - Structure Task Final
 0:01:00
08-13 - Final Task Architecture and Structure
 0:06:00
08-14 - Export Image from Revit
 0:10:00
08-15 - Render by Nano Banana Pro
 0:05:00
08-16 - PowerPoint and Canva
 0:05:00
08-17 - Get Autodesk Certification
 0:06:00
08-18 - Conclusion Of Tasks – مهم جدا
 0:02:00
08-19 - Choose your Team
 0:07:00
08-20 - Q and A Wall wrapping
 0:05:00
08-21 - Q and A Panel Connection
 0:03:00
08-22 - Q and A Sky Light
 0:06:00
08-23 - Q and A Wall Floor Layers Basic
 0:04:00
08-24 - Q and A Curved Edge with Roof
 0:04:00
Chapter 09 - Lecture 925 Lessons
 2:06:00
09-01 - Lecture Introduction
 0:02:00
09-02 - Over EJS
 0:07:00
09-03 - Create Files
 0:02:00
09-04 - Create Levels
 0:07:00
09-05 - Prepare CAD File for Revit
 0:09:00
09-06 - Insert CAD Link
 0:06:00
09-07 - Create Grids
 0:08:00
09-08 - Copy Monitor to Architecture
 0:08:00
09-09 - Copy Monitor to Structure
 0:03:00
09-10 - Working with group – File segregation
 0:10:00
09-11 - Insert Column and grids cad
 0:02:00
09-12 - Create Column Types
 0:06:00
09-13 - Insert Foundation CAD plan
 0:05:00
09-14 - Create Foundation Types
 0:05:00
09-15 - Base Offset of RC Foundation
 0:04:00
09-16 - PC Foundation
 0:05:00
09-17 - Ground Beam
 0:03:00
09-18 - Overview STR EJS
 0:02:00
09-19 - Overview of Arch EJS
 0:11:00
09-20 - Federation Model
 0:04:00
09-21 - Divid Work on Team
 0:05:00
09-22 - What Is next
 0:04:00
09-23 - Q and A Beam system
 0:01:00
09-24 - Q and A PC
 0:03:00
09-25 - Q and A Link Cad Edition in Revit
 0:04:00
Chapter 10 - Lecture 1029 Lessons
 3:23:00
10-01 - Introduction BIM Standards
 0:02:00
10-02 - What Is standards
 0:08:00
10-03 - List Abbreviations
 0:04:00
10-04 - List Abbreviations ISO19650
 0:04:00
10-05 - BIM Maturity Level
 0:08:00
10-06 - BIM Maturity Level ISO19650
 0:01:00
10-07 - Open BIM VS Closed BIM
 0:07:00
10-08 - IFC In Revit
 0:06:00
10-09 - BIM Uses
 0:09:00
10-10 - What Is Next
 0:01:00
10-11 - CDE
 0:06:00
10-12 - CDE ISO19650
 0:04:00
10-13 - LOD
 0:07:00
10-14 - Cont. LOD
 0:02:00
10-15 - LOD BIM Form
 0:09:00
10-16 - Q and A LOD
 0:01:00
10-17 - Project Life Cycle
 0:01:00
10-18 - BIM Implementation
 0:08:00
10-19 - COBie
 0:06:00
10-20 - BEP
 0:05:00
10-21 - Sheets Name
 0:04:00
10-22 - Naming Conventional ISO19650
 0:02:00
10-23 - Overview BEP Sample
 0:09:00
10-24 - TASK ISO19650
 0:06:00
10-25 - Task Delivery
 0:03:00
10-26 - Autodesk Construction Cloud
 0:12:00
10-27 - Solve CAD Fonts
 0:02:00
10-28 - Q and A Insert Image
 0:02:00
10-29 - BIM Execution Plan - Complete Example
 1:04:00
Chapter 11 - Lecture 1125 Lessons
 2:04:00
11-01 - L Shape Column by Extrusion
 0:06:00
11-02 - Cont- L Shape Column
 0:02:00
11-03 - Stair By Extrusion
 0:04:00
11-04 - Blend
 0:05:00
11-05 - Dome By Revolve
 0:06:00
11-06 - Sweep
 0:06:00
11-07 - Cont- Sweep
 0:03:00
11-08 - Analysis Task 13-1
 0:07:00
11-09 - Cont- Analysis13-1
 0:06:00
11-10 - Swept Blend
 0:03:00
11-11 - Void
 0:05:00
11-12 - Cont- Void
 0:05:00
11-13 - MIP Project
 0:17:00
11-14 - Table Width Length
 0:07:00
11-15 - Thickness- Height
 0:03:00
11-16 - Create Legs
 0:03:00
11-17 - Leg Offsets
 0:03:00
11-18 - Material
 0:02:00
11-19 - Sweep
 0:03:00
11-20 - Arrange Parameters
 0:01:00
11-21 - Formal
 0:02:00
11-22 - Visibly Of Chair Leg
 0:06:00
11-23 - Array in Family
 0:11:00
11-24 - Task MIP - Family Essential
 0:04:00
11-25 - Q and A Buck up ACC Project
 0:04:00
Chapter 12 - Lecture 1227 Lessons
 2:24:00
12-01 - Create Nested Family
 0:07:00
12-02 - Bridge Nested Parameters
 0:06:00
12-03 - Shared Family
 0:02:00
12-04 - Overview Door Family
 0:05:00
12-05 - Choose Right Family Template
 0:05:00
12-06 - Interior-Ex Wall Finish Parameters
 0:04:00
12-07 - Door Fram
 0:04:00
12-08 - Door Leaf
 0:06:00
12-09 - Material
 0:02:00
12-10 - Test Door
 0:01:00
12-11 - Door Opening
 0:04:00
12-12 - Rough Wide- Heigh
 0:03:00
12-13 - Visibility
 0:03:00
12-14 - Door In 2d
 0:06:00
12-15 - Model Line Vs Details Line
 0:02:00
12-16 - Door Handel
 0:03:00
12-17 - Discussion Door
 0:10:00
12-18 - Door Types
 0:05:00
12-19 - Door Types Advanced
 0:05:00
12-20 - Cont- Advanced Types
 0:05:00
12-21 - Door Window Family Task
 0:10:00
12-22 - Family In Arch Villa Project
 0:16:00
12-23 - Revit City
 0:05:00
12-24 - Elevator Submit Overview
 0:07:00
12-25 - Create Sumit By MIP
 0:09:00
12-26 - Convert MIP To Family
 0:07:00
12-27 - Task Family Advanced
 0:02:00
Chapter 13 - Lecture 1329 Lessons
 3:31:00
13-01 - Intro Worksharing
 0:05:00
13-02 - Weight of Worksharing in Job
 0:03:00
13-03 - Worksharing Strategy
 0:05:00
13-04 - Start Local Worksharing
 0:07:00
13-05 - Cont. Local Worksharing
 0:02:00
13-06 - Cont. Local Worksharing 2
 0:04:00
13-07 - worksharing p1
 0:21:00
13-08 - -worksharing p2
 0:21:00
13-09 - worksharing p3
 0:25:00
13-10 - worksharing p4
 0:20:00
13-11 - worksharing p5
 0:31:00
13-12 - Conclusion
 0:01:00
13-13 - Start ACC Setup
 0:06:00
13-14 - Create New Account and Invitation
 0:05:00
13-15 - Two Factor Authentication
 0:05:00
13-16 - Create Project
 0:04:00
13-17 - Add members
 0:03:00
13-18 - Access Level
 0:02:00
13-19 - Design Collaboration
 0:01:00
13-20 - CDE
 0:02:00
13-21 - Login To Autodesk desktop connector
 0:03:00
13-22 - Solve Issues
 0:05:00
13-23 - CDE 2
 0:03:00
13-24 - Synch With Cloud
 0:08:00
13-25 - Open Project on ACC
 0:03:00
13-26 - From Local Worksharing to ACC
 0:02:00
13-27 - Full Conclusion ACC
 0:06:00
13-28 - Task
 0:02:00
13-29 - Q and A MIP
 0:06:00
Chapter 14 - Lecture 1426 Lessons
 2:27:00
14-01 - Q and A MIP1
 0:03:00
14-02 - Q and A MIP2
 0:03:00
14-03 - Q and A MIP3
 0:03:00
14-04 - BIM Workflow
 0:15:00
14-05 - Cont.BIM WorkFlow
 0:02:00
14-06 - Villa Files OverView
 0:05:00
14-07 - Str Overview
 0:03:00
14-08 - Mep Overview
 0:03:00
14-09 - Elec OverView
 0:03:00
14-10 - Electro mechanical Course
 0:03:00
14-11 - Create Project on ACC
 0:07:00
14-12 - Role of Other Project Members
 0:02:00
14-13 - Create Grids and Level
 0:19:00
14-14 - Collab Levels and Grids File
 0:02:00
14-15 - Start Architecture Project
 0:08:00
14-16 - Start Structure Project
 0:08:00
14-17 - Create Foundation Levels
 0:11:00
14-18 - Create Isolated Footing types
 0:07:00
14-19 - Modeling Isolated Footing
 0:07:00
14-20 - Tips and Tricks Isolated Family
 0:03:00
14-21 - RC Foundation
 0:07:00
14-22 - Overview Str Model
 0:08:00
14-23 - Tasks
 0:01:00
14-24 - Cont.Tasks
 0:04:00
14-25 - Important
 0:03:00
14-26 - Q and A Door opening
 0:07:00
Chapter 15 - Lecture 1522 Lessons
 2:47:00
15-01 - Insert CAD Str Col
 0:09:00
15-02 - Modeling Str Col
 0:11:00
15-03 - Str Wall
 0:07:00
15-04 - Cont.Str Wall
 0:06:00
15-05 - Assign Foundation Level
 0:04:00
15-06 - Create Ground Beam
 0:01:00
15-07 - Cont.Ground Beam
 0:07:00
15-08 - PC 300
 0:04:00
15-09 - PC 100
 0:08:00
15-10 - Copy Past COL Through level
 0:11:00
15-11 - Ground Floor CAD
 0:04:00
15-12 - Beam -Ground Floor
 0:14:00
15-13 - Ground Floor
 0:11:00
15-14 - Cont. Ground Floor
 0:05:00
15-15 - Column Algine
 0:09:00
15-16 - First Floor
 0:09:00
15-17 - Whats Is Next
 0:05:00
15-18 - B12
 0:07:00
15-19 - Arch Beam
 0:12:00
15-20 - Elevator Submit Overview
 0:07:00
15-21 - Create Sumit By MIP
 0:09:00
15-22 - Convert MIP To Family
 0:07:00
Chapter 16 - Lecture 1629 Lessons
 2:15:00
16-01 - Discussion About ACC
 0:09:00
16-02 - Deep In ACC
 0:08:00
16-03 - Q and A ACC
 0:03:00
16-04 - Q and A ACC
 0:02:00
16-05 - Tips and Trick Working Offline
 0:05:00
16-06 - Local Files of Acc
 0:04:00
16-07 - Link Str Project
 0:01:00
16-08 - Wall Workflow
 0:08:00
16-09 - Notes about BlockWork
 0:04:00
16-10 - Isert CAD Link
 0:05:00
16-11 - Create Ar Wall
 0:05:00
16-12 - VV
 0:03:00
16-13 - VV of LINK
 0:04:00
16-14 - Material Shaded
 0:03:00
16-15 - Override Str Col Pattern
 0:02:00
16-16 - Cot.Wall Modeling
 0:05:00
16-17 - Wall Door Relation
 0:08:00
16-18 - Cont. Wall Door Relation
 0:02:00
16-19 - Cont. Wall Door Relation
 0:04:00
16-20 - Wall Base Top Offset
 0:07:00
16-21 - Filters
 0:09:00
16-22 - Wall Top Offset
 0:09:00
16-23 - Floor Workflow
 0:02:00
16-24 - El ma3bara
 0:05:00
16-25 - Rooms Essential
 0:04:00
16-26 - Cont.Rooms
 0:06:00
16-27 - Create Rooms in Villa
 0:02:00
16-28 - Task
 0:04:00
16-29 - Discussion
 0:02:00
Chapter 17 - Lecture 1761 Lessons
 4:28:00
17-01 - Over View Circulation
 0:03:00
17-02 - Create Stair - Options Bar
 0:04:00
17-03 - Instance Parameters
 0:04:00
17-04 - Stair Design Concept
 0:04:00
17-05 - Extend Below Riser
 0:03:00
17-06 - Floor Opening For Stair
 0:02:00
17-07 - Type Properties of Stair Run
 0:08:00
17-08 - Ending With Riser
 0:03:00
17-09 - Stair Connection with Floor
 0:03:00
17-10 - Stair Connection with Landing
 0:04:00
17-11 - Cont. Stair Connection with Landing
 0:02:00
17-12 - Landing Type
 0:05:00
17-13 - Landing Sketch
 0:02:00
17-14 - Q And A Stair 1
 0:02:00
17-15 - Multi Story Stair
 0:07:00
17-16 - Q And Stair 2
 0:03:00
17-17 - Other Components Stair
 0:05:00
17-18 - Stair By Sketch
 0:08:00
17-19 - Wall Stair
 0:04:00
17-20 - Anti-Slip Stair Landing
 0:07:00
17-21 - Ramps Type Parameters
 0:04:00
17-22 - Slop Of Ramps
 0:05:00
17-23 - Why Not Ramp
 0:03:00
17-24 - Floor As Ramp
 0:04:00
17-25 - Ramp Annotation for Construction
 0:03:00
17-26 - Railing On Stair and Ramps
 0:03:00
17-27 - Railing Sketch
 0:02:00
17-28 - Railing Instance Para
 0:04:00
17-29 - Top Rail
 0:04:00
17-30 - Handrails
 0:02:00
17-31 - Railing Structure
 0:02:00
17-32 - Baluster Placement
 0:05:00
17-33 - Baluster Per Tread
 0:04:00
17-34 - Railing Samples
 0:07:00
17-35 - Baluster Family
 0:07:00
17-36 - Overview Stair Villa
 0:05:00
17-37 - Extract Structure and Architecture Stair Data
 0:15:00
17-38 - Q And A Stair 1
 0:02:00
17-39 - Structure Stair in Model
 0:06:00
17-40 - Insert CAD
 0:04:00
17-41 - Floor Opening
 0:02:00
17-42 - Start Structure Modeling
 0:05:00
17-43 - Top Connection Stair
 0:03:00
17-44 - Bottom Connection Stair
 0:03:00
17-45 - Landing Connection
 0:07:00
17-46 - Structure Model Last Touch
 0:06:00
17-47 - Overview Stair Villa Architecture
 0:04:00
17-48 - Copy And Past Structure Stair
 0:03:00
17-49 - Bottom Connection Stair
 0:02:00
17-50 - Architecture Model Last Touch
 0:07:00
17-51 - Stair Task
 0:02:00
17-52 - Overview Circulation in Villa
 0:06:00
17-53 - External Ramp
 0:10:00
17-54 - Internal Ramp
 0:04:00
17-55 - Overview Railing in Villa Model
 0:03:00
17-56 - Stair Railing
 0:10:00
17-57 - Railing Profile
 0:03:00
17-58 - Railing baluster
 0:06:00
17-59 - External Architecture Ramp
 0:02:00
17-60 - Ramp Railing
 0:02:00
17-61 - Top railing Editing
 0:04:00
Chapter 18 - Lecture 1823 Lessons
 3:01:00
18-01 - Interior Workflow
 0:05:00
18-02 - Prepare Rvt File
 0:02:00
18-03 - Intro Interior
 0:09:00
18-04 - Over Interior Element
 0:08:00
18-05 - Wall Naming
 0:13:00
18-06 - Modeling Finish 25
 0:05:00
18-07 - Modeling Finish 26
 0:03:00
18-08 - Q And A Wall Finishing
 0:01:00
18-09 - Wazarat
 0:09:00
18-10 - Ceiling Finish
 0:08:00
18-11 - Q And A 1
 0:07:00
18-12 - Q And A 2
 0:05:00
18-13 - Caranish
 0:12:00
18-14 - False Ceiling
 0:12:00
18-15 - Jet Floor
 0:10:00
18-16 - Cont.Jet Floor
 0:07:00
18-17 - Paint
 0:04:00
18-18 - Wall Paper
 0:14:00
18-19 - Stair Finish
 0:12:00
18-20 - Cont.Stair Finish
 0:08:00
18-21 - Interior Task
 0:07:00
18-22 - Q and A Railing
 0:12:00
18-23 - ACC Q and A
 0:08:00
Chapter 19 - Lecture 1919 Lessons
 3:07:00
19-01 - Revision STR and ARC Modeling
 0:01:00
19-02 - Revision Foundation
 0:30:00
19-03 - Stair of Ground
 0:03:00
19-04 - Depression Floor of Ground
 0:05:00
19-05 - Arch Beam
 0:10:00
19-06 - Arch Window
 0:04:00
19-07 - Cont. Arch Window
 0:11:00
19-08 - Cont.STR Modeling
 0:12:00
19-09 - Cont.Arc Beam
 0:09:00
19-10 - Revision Roof and Upper Roof
 0:07:00
19-11 - Cont. Revision Roof and Upper Roof
 0:04:00
19-12 - Q and A Str 1
 0:05:00
19-13 - Q and A Arch Beam
 0:13:00
19-14 - Revision Outside Stair
 0:14:00
19-15 - Architecture Modeling Revision
 0:35:00
19-16 - Q and A Railing on Floor
 0:02:00
19-17 - Q and A Architecture Revision
 0:15:00
19-18 - Task Delivery
 0:04:00
19-19 - Q and A Links on ACC
 0:03:00
Chapter 20 - Lecture 2027 Lessons
 3:13:00
20-01 - Exterior Workflow
 0:08:00
20-02 - Exterior of Villa components
 0:06:00
20-03 - Family or MIP
 0:04:00
20-04 - Deep Overview on Exterior
 0:08:00
20-05 - Prepare View for Exterior Wall Finish
 0:10:00
20-06 - Cont- Prepare View for Exterior Wall Finish
 0:02:00
20-07 - Prepare CAD Elevation
 0:08:00
20-08 - Insert CAD
 0:04:00
20-09 - GRC Works Around Exterior Opening MIP
 0:20:00
20-10 - GRC Works Around Exterior Opening Family
 0:09:00
20-11 - Stone For Exterior Finish
 0:12:00
20-12 - Cont- Stone For Exterior Finish
 0:06:00
20-13 - Overview Roof component
 0:12:00
20-14 - Prepare CAD For Roofs
 0:05:00
20-15 - Basic Roof
 0:06:00
20-16 - Armids
 0:05:00
20-17 - Roof Facia
 0:09:00
20-18 - Roof Finish
 0:07:00
20-19 - Roof Relation With Other Elements
 0:02:00
20-20 - Cont- Roofs
 0:04:00
20-21 - Roof Of Upper Roof
 0:17:00
20-22 - Other Roof Component
 0:04:00
20-23 - FORFORG Works
 0:10:00
20-24 - Family for GRC
 0:01:00
20-25 - Exterior Modeling Task
 0:03:00
20-26 - Electrical and Mechanical Works
 0:07:00
20-27 - Q and A
 0:04:00
Chapter 21 - Lecture 2131 Lessons
 2:49:00
21-01 - Introduction
 0:05:00
21-02 - Fields
 0:08:00
21-03 - Filter
 0:04:00
21-04 - Sorting
 0:02:00
21-05 - Total
 0:01:00
21-06 - Apply
 0:01:00
21-07 - Other Levels Str Col
 0:02:00
21-08 - Model Revision
 0:11:00
21-09 - Check Classification
 0:08:00
21-10 - RC
 0:07:00
21-11 - MIP
 0:03:00
21-12 - Stairs
 0:07:00
21-13 - Collect in Sheet
 0:04:00
21-14 - Beams
 0:04:00
21-15 - Beams Join with Floor
 0:06:00
21-16 - Export To Excel
 0:11:00
21-17 - Condintinal Format
 0:10:00
21-18 - Appearance
 0:06:00
21-19 - Instance Appearance
 0:02:00
21-20 - Add Images
 0:01:00
21-21 - Tips to Show B and H of Columns
 0:07:00
21-22 - Combine Parameters
 0:02:00
21-23 - Calculated Parameters
 0:04:00
21-24 - QS from Link
 0:04:00
21-25 - Ramps
 0:02:00
21-26 - Transfer schedules to other project
 0:02:00
21-27 - Browser Organization
 0:06:00
21-28 - Filter by sheets
 0:07:00
21-29 - Revision Qs by Revit
 0:06:00
21-30 - Task QS
 0:01:00
21-31 - طريقة تسليم التاسك
 0:25:00
Chapter 22 - Lecture 2235 Lessons
 3:13:00
22-01 - Intro Architecture Bill Of Quantity
 0:08:00
22-02 - QS Wall-Fields
 0:08:00
22-03 - QS AR-Wall-Cement-100mm - First to Second
 0:10:00
22-04 - Axis Of wall in QS
 0:05:00
22-05 - Advanced Wall Numbering Technique
 0:17:00
22-06 - Number of Bricks
 0:02:00
22-07 - Number of Bricks with Wast
 0:02:00
22-08 - Cost Of Brick Works
 0:05:00
22-09 - BOQ Block M3
 0:05:00
22-10 - Number of Hollow Block to Solid wall
 0:02:00
22-11 - QS of Finishing Wall
 0:11:00
22-12 - QS Doors
 0:17:00
22-13 - QS Windows
 0:02:00
22-14 - Sub Are Of Opening Less -25
 0:06:00
22-15 - Cont- Sub Are Of Opening Less -25
 0:01:00
22-16 - الوزرات
 0:08:00
22-17 - BOQ Ceramic
 0:04:00
22-18 - BOQ Sand
 0:03:00
22-19 - اعتاب الأبواب والشبابيك
 0:07:00
22-20 - الكارنيشن
 0:07:00
22-21 - BOQ Ceiling Works
 0:09:00
22-22 - BOQ Exterior Finish
 0:09:00
22-23 - Railing on Exterior Finish
 0:02:00
22-24 - اعمال القرميد
 0:02:00
22-25 - GRC Exterior wall
 0:04:00
22-26 - قصيه الردم
 0:04:00
22-27 - تجليد السلالم
 0:03:00
22-28 - Stair Railing
 0:03:00
22-29 - Ramps Finish
 0:01:00
22-30 - الفرش
 0:05:00
22-31 - الكهربا ومخارج التكيف
 0:03:00
22-32 - عزل الحمامات والاسطح وخرسانه الميول
 0:03:00
22-33 - Add Images to Schedule
 0:07:00
22-34 - Create Empty Schedule
 0:06:00
22-35 - Task ِArchitecture quantity Survey
 0:02:00
Chapter 23 - Lecture 2327 Lessons
 2:18:00
23-01 - Intro Revit Template
 0:04:00
23-02 - Start New Template
 0:03:00
23-03 - Prepare Template
 0:03:00
23-04 - Place Dim
 0:06:00
23-05 - Tricks
 0:01:00
23-06 - Dim Graphics
 0:10:00
23-07 - Dim Text
 0:04:00
23-08 - Unit
 0:02:00
23-09 - Instance Para
 0:02:00
23-10 - Cont.DIM
 0:03:00
23-11 - Other Dim
 0:08:00
23-12 - Purge Unused
 0:02:00
23-13 - Spot Elevation
 0:07:00
23-14 - Cont. Spot Elevation
 0:05:00
23-15 - Spot Coor
 0:11:00
23-16 - Cont. Spot Coordinates
 0:07:00
23-17 - intro Tags
 0:07:00
23-18 - Door Tag
 0:03:00
23-19 - Windows Tag
 0:03:00
23-20 - Window Tag
 0:03:00
23-21 - Room Tag
 0:10:00
23-22 - Railing Tag
 0:05:00
23-23 - Floor Tag
 0:10:00
23-24 - Positive
 0:03:00
23-25 - Str Col
 0:05:00
23-26 - Beam
 0:09:00
23-27 - Task
 0:02:00
Chapter 24 - Lecture 2423 Lessons
 2:39:00
24-01 - Parameters
 0:01:00
24-02 - Cont- Parameters
 0:15:00
24-03 - Beam Tag
 0:07:00
24-04 - Grids
 0:05:00
24-05 - Grid Head
 0:04:00
24-06 - Add Subcat to Fam
 0:04:00
24-07 - Q And A
 0:03:00
24-08 - Level Head
 0:01:00
24-09 - Cont- Level
 0:09:00
24-10 - Tricks In Level
 0:02:00
24-11 - Section Head and Tail
 0:05:00
24-12 - Sheets
 0:05:00
24-13 - Sheet Family
 0:22:00
24-14 - Add Scale Para To Sheets
 0:08:00
24-15 - Revision Sc Family
 0:07:00
24-16 - Scaling in View
 0:11:00
24-17 - Sheet Key
 0:03:00
24-18 - Sheet Key 2
 0:12:00
24-19 - Divid View Through View
 0:08:00
24-20 - Tag Elevation
 0:11:00
24-21 - Keynote
 0:03:00
24-22 - Revision Sheet
 0:08:00
24-23 - Task Final Template
 0:05:00
Chapter 25 - Lecture 2537 Lessons
 3:14:00
25-01 - Intro Dynamo
 0:04:00
25-02 - Create Point Line
 0:08:00
25-03 - Apply Create Line
 0:02:00
25-04 - 04-Create Beam
 0:03:00
25-05 - Revit Unit
 0:02:00
25-06 - Operator
 0:04:00
25-07 - Save
 0:03:00
25-08 - Create Wall
 0:07:00
25-09 - 09-Get Set Para
 0:05:00
25-10 - 10-Set Structural Wall
 0:02:00
25-11 - Boolean
 0:02:00
25-12 - Select
 0:05:00
25-13 - ID
 0:08:00
25-14 - Create Shared Para
 0:09:00
25-15 - Cont- Shared Parameters
 0:02:00
25-16 - Ramp Volume
 0:10:00
25-17 - Convert by Units
 0:02:00
25-18 - Create Volume Parameter
 0:03:00
25-19 - Cont- Create Volume Parameter
 0:04:00
25-20 - Organize Scripts
 0:04:00
25-21 - Dynamo Player
 0:08:00
25-22 - Level Of Wall Sweep
 0:08:00
25-23 - Split String
 0:08:00
25-24 - Multi Category Schedule Issue
 0:05:00
25-25 - Solve By dynamo
 0:10:00
25-26 - Cont- Solve by Dynamo
 0:04:00
25-27 - Upper Case View Name
 0:06:00
25-28 - Transfer Data from Type Name to Type Comments
 0:11:00
25-29 - Interface
 0:09:00
25-30 - Dynamo Website - Learn
 0:03:00
25-31 - Forums
 0:03:00
25-32 - Road Map -Dynamo Builds
 0:05:00
25-33 - Chat GPT With Dynamo – Upgrade Dynamo Version
 0:07:00
25-34 - Chat GPT With Dynamo – Upper Case View Name
 0:03:00
25-35 - Chat Gpt with Python
 0:04:00
25-36 - Task Dynamo
 0:02:00
25-37 - Nonica Tab - Dynamo Player
 0:09:00
Chapter 26 - Lecture 2617 Lessons
 2:12:00
26-01 - Detailing Intro
 0:03:00
26-02 - Create Model For Detailning
 0:10:00
26-03 - Line Style
 0:10:00
26-04 - Hatches
 0:16:00
26-05 - Detailed Commandant
 0:02:00
26-06 - Insulation
 0:02:00
26-07 - Line Work
 0:06:00
26-08 - Details Family
 0:07:00
26-09 - Import Detailing from CAD
 0:05:00
26-10 - Text
 0:05:00
26-11 - Draft View VS Legends
 0:05:00
26-12 - Windows and Doors Legends
 0:11:00
26-13 - Room Finish
 0:17:00
26-14 - Advanced Room Finish
 0:07:00
26-15 - Creating Template Workflow
 0:10:00
26-16 - Cont Template Workflow
 0:11:00
26-17 - Tasks Imortant
 0:05:00
Chapter 27 - Lecture 2719 Lessons
 2:10:00
27-01 - Setup Navisworks
 0:08:00
27-02 - Navisworks Functions
 0:05:00
27-03 - Introduction Navisworks File
 0:08:00
27-04 - File Types
 0:03:00
27-05 - User Interface
 0:04:00
27-06 - Auto Save and Unite
 0:01:00
27-07 - Open Navisworks Project
 0:05:00
27-08 - Revit with Navisworks Export
 0:15:00
27-09 - Revit with Navisworks Import
 0:04:00
27-10 - Views
 0:09:00
27-11 - Select and Search
 0:10:00
27-12 - Cont. select and Search
 0:05:00
27-13 - Navigation Tool
 0:11:00
27-14 - Visibility and Display
 0:07:00
27-15 - Viewpoint
 0:05:00
27-16 - Review
 0:06:00
27-17 - Review
 0:07:00
27-18 - Render
 0:13:00
27-19 - Task
 0:04:00

Kayan Academy

Kayan Academy is a specialized company in training, technical support, and services for Engineering and Graphics software. Since 2009 till now Kayan Academy has adopted an innovative approach to integrated solutions in CAD & BIM technology by implementing strategies based on commitment, quality, customer satisfaction, and high return on investment. During this period Kayan Academy has expanded its services in Egypt and Gulf. In 2017 Kayan Academy opened its office in Alexandria and Cairo to deliver the most updated services to its customers

Find Us On

Contact Us

+201020819686
+2010 260 89 086
+2011 19 561 245
+2010 17 207 636
+964 784 649 7506
+2015 51 181 765
Info@kayan-co.org
مكرم عبيد - مدينه نصر - القاهرة
https://goo.gl/maps/sk8ikbPv64DwRwEw9
----------------------------------
شارع عدلي يكن- جليم - الإسكندرية
https://goo.gl/maps/7KmDZhoe4bmxkV3Z9
Copyright © Kayan Academy 2026
Powered by ® Teachal