Courses

BIM Management diploma Group 51

BIM Management diploma Group 51
500 USD 250 USD
Accepted Payment Methods
  Buy Now
Lessons
596 Lessons in 26 Chapters
Duration
61 Hours & 6 Minutes
Students
196 Students in 13 Countries
Instructor
Selim Badwy BIM Manager


  لمعرفة موعد الكورس والخصومات المتاحة 
تواصل مع
Wa.me/201020819686
  • المحتوي التفصيلي لدوره البيم ( حضور في القاهره - مدينه نصر / تفاعلي علي زوم )
  • بعد اصدار بيان قوات المسلحه بأنها سوف لا تعتمد اي مخططات غير بصيغه الريفيت 
  • و بما ان معظم مشاريع الان تحت سيطره الهيئه الهندسيه للقوات المسلحه 
  • فأصبح لا مجال للعمل الا بتعلم البيم و اتقان اهم ادواته وهو الريفيت 
  • البرامج التي نتعامل معها في الكورس 
  • - يتم العمل علي برامج 
  • 1- الاتوكاد 
  • 2-الريفيت المعماري 
  • 3-الريفيت الانشائي 
  • 4-النافيس ورك
  • 5-البريمافيرا
  • 6-الدينامو 
  • الكورس عباره عن شرح تطبقي علي مشروع من اول محاضره 
  • يحصل المتدريب علي 4 شهادات من شركه اتوديسك وشهاده من شركه كيان للاستشارات الهندسيه 
  • لمن هذا الكورس 
  • 1- مهندسي المكتب الفني الانشائين والمعماريين 
  • 2- حديثي التخرج 
  • 3- مهندسي الموقع ليكون الخطوه القادمه هي العمل بمظومه تعمل بالبيم 
  • يؤهلك الكورس العمل كــــ 
  • 1-مهندس مكتب فني بيم 
  • 2-بيم كوردناتور 
  • 3-مهندس تخطيط 
  • 4- المكاتب الاستشارية التي تعمل بالبيم 
  • مدير نمذجه البيم بعد عدد من سنوات الخبره 
  • عدد ساعات الكورس : 100 ساعه مقمسه علي 25 محاضره 
  • يتم تسليم التاسك المطلوب منك قبل بدايه المحاضره والمناقشه مع المحاضر في الوقت المتاح للاسئله 
  • لمزيد من التفاصيل يرجي التواصل معنا بالظبط علي معرفه المزيد 
Course Curriculum
  Expand All     Collapse All
Chapter 01 - Lecture 118 Lessons
 3:48:00
01-01 - What Is BIM Theoretical
 0:17:00
01-02 - What Is BIM Application
 0:20:00
01-03 - BIM WorkFlow VS CAD WorkFlow
 0:03:00
01-04 - Q And Answer
 0:13:00
01-05 - Content Fast View
 0:03:00
01-06 - Course Break Down
 0:11:00
01-07 - Diploma Certification
 0:03:00
01-08 - Sample of Student Outcome
 0:05:00
01-09 - Diploma Software
 0:05:00
01-10 - Diploma Outcome
 0:02:00
01-11 - For Who That Course
 0:03:00
01-12 - BIM Positions
 0:05:00
01-13 - Ramadan Times
 0:06:00
01-14 - Recorded Lectures
 0:03:00
01-15 - Software Requirements
 0:09:00
01-16 - Setup Software
 0:05:00
01-17 - Q and A Online 1
 0:26:00
01-18 - Q and A Online 2
 1:29:00
Chapter 02 - Lecture 220 Lessons
 1:42:00
02-01 - Lecture Introduction (Important)
 0:07:00
02-02 - Open Revit
 0:01:00
02-03 - Revit Home Page
 0:03:00
02-04 - Choose the Right Template
 0:04:00
02-05 - Revit Interface
 0:06:00
02-06 - Use Mouse
 0:04:00
02-07 - Great Wall
 0:08:00
02-08 - Quiz - Wall
 0:04:00
02-09 - Instance Parameters Wall
 0:09:00
02-10 - Save Project
 0:04:00
02-11 - Modeling Destruction
 0:05:00
02-12 - Location Line
 0:07:00
02-13 - Create Grids
 0:10:00
02-14 - Quiz Creating Grids
 0:02:00
02-15 - Create Levels
 0:07:00
02-16 - Q and A Levels
 0:02:00
02-17 - Create Floor
 0:06:00
02-18 - Depression In Floor
 0:03:00
02-19 - Instance Parameters Floor
 0:02:00
02-20 - Task 02
 0:08:00
Chapter 03 - Lecture 323 Lessons
 2:27:00
03-01 - Intro Lecture 3
 0:04:00
03-02 - Open Project
 0:05:00
03-03 - Draw 1
 0:08:00
03-04 - Draw 2
 0:04:00
03-05 - Q And A Draw
 0:03:00
03-06 - Modify 1
 0:07:00
03-07 - Modify 2
 0:08:00
03-08 - Q And A Modify 2
 0:02:00
03-09 - Modify 3
 0:07:00
03-10 - Modify 4
 0:10:00
03-11 - Modify 5
 0:10:00
03-12 - Revit Option
 0:10:00
03-13 - Level - Underlay
 0:06:00
03-14 - Prepare Ceiling Plan
 0:03:00
03-15 - Modeling Ceiling
 0:04:00
03-16 - Cont. Modeling Ceiling
 0:08:00
03-17 - Multi-Level Ceiling
 0:03:00
03-18 - Section Box
 0:05:00
03-19 - Create Ceiling Light Profile
 0:15:00
03-20 - Place Lighting on Ceiling
 0:04:00
03-21 - Create Roof by Footprint
 0:07:00
03-22 - Edit Slop Roof
 0:03:00
03-23 - Task
 0:11:00
Chapter 04 - Lecture 424 Lessons
 2:33:00
04-01 - Construction In Roof
 0:03:00
04-02 - Roof by Extrusion
 0:05:00
04-03 - Cont- Roof Extrusion
 0:05:00
04-04 - Application Roof
 0:11:00
04-05 - Roof by Modify Sub Elements
 0:10:00
04-06 - Construction of Floor Slopes
 0:05:00
04-07 - Slopping Floor
 0:10:00
04-08 - Roof Edge - Sofit
 0:06:00
04-09 - Roof Edge - Facia
 0:08:00
04-10 - Roof Edge - Gutter
 0:05:00
04-11 - Opening By Face
 0:04:00
04-12 - Shaft
 0:07:00
04-13 - Wall Opening
 0:04:00
04-14 - Vertical Opening
 0:03:00
04-15 - Visibility And Graphics
 0:10:00
04-16 - Temp Hide
 0:05:00
04-17 - Hide Element
 0:03:00
04-18 - Material Essential
 0:13:00
04-19 - Setup Project
 0:06:00
04-20 - Project Floors
 0:07:00
04-21 - Project Walls
 0:02:00
04-22 - Project Window And Doors
 0:07:00
04-23 - Project Landscape
 0:08:00
04-24 - Project Roofs
 0:06:00
Chapter 05 - Lecture 524 Lessons
 1:58:00
05-01 - Intro Lecture 5
 0:03:00
05-02 - Revit Hierarchy
 0:09:00
05-03 - Cont.Revit Component
 0:07:00
05-04 - Q and A Revit Component
 0:01:00
05-05 - Curtain Wall
 0:06:00
05-06 - Curtain Wall Instance
 0:04:00
05-07 - Apply Curtain Wall Instance
 0:01:00
05-08 - Place Grids
 0:04:00
05-09 - Mullion Types
 0:03:00
05-10 - Louver
 0:06:00
05-11 - Cont.Louver
 0:05:00
05-12 - Apply Louver
 0:05:00
05-13 - Q and A Curtain Wall
 0:02:00
05-14 - Curtain Wall As wall
 0:03:00
05-15 - Place Door on Curtain
 0:06:00
05-16 - Task 05-1
 0:07:00
05-17 - Load Family From Autodesk Library
 0:03:00
05-18 - Curved Curtain Wall
 0:07:00
05-19 - Stacked Wall
 0:07:00
05-20 - Inclined Wall
 0:03:00
05-21 - Taperd Wall
 0:06:00
05-22 - Corner Curtain Wall
 0:05:00
05-23 - Cont.Task 5-1
 0:10:00
05-24 - Task 5-2
 0:05:00
Chapter 06 - Lecture 622 Lessons
 1:55:00
06-01 - Sky Light
 0:07:00
06-02 - Intro Structure
 0:02:00
06-03 - Start Structure project
 0:02:00
06-04 - AR wall SV ST Wall
 0:04:00
06-05 - AR Floor VS ST floor
 0:05:00
06-06 - Structure Column
 0:05:00
06-07 - Cont. Structure Column
 0:04:00
06-08 - Beam
 0:04:00
06-09 - Cont. Beams
 0:09:00
06-10 - Cont. Beams
 0:02:00
06-11 - Opening Beam
 0:02:00
06-12 - Stair Beam
 0:05:00
06-13 - Arch Beam
 0:06:00
06-14 - Instance Parameters
 0:02:00
06-15 - Waffle Slab
 0:08:00
06-16 - Opening in Waffle Slab
 0:04:00
06-17 - Beam System
 0:05:00
06-18 - Arch Beam System
 0:09:00
06-19 - Saw tooth System
 0:10:00
06-20 - Isolated Foundation
 0:06:00
06-21 - Strip Footing
 0:09:00
06-22 - Tasks
 0:05:00
Chapter 07 - Lecture 718 Lessons
 2:08:00
07-01 - Combined Footing
 0:06:00
07-02 - Raft
 0:01:00
07-03 - Slab Edge
 0:06:00
07-04 - Elevator Submit
 0:06:00
07-05 - Wall Sweep Reveal
 0:05:00
07-06 - Slanted Col with Floor
 0:11:00
07-07 - Pile Cap As Str Foundation
 0:07:00
07-08 - Pile Cap Family
 0:06:00
07-09 - Raft On Piles
 0:06:00
07-10 - Secant Pile
 0:07:00
07-11 - Sheets Pile
 0:03:00
07-12 - PC
 0:02:00
07-13 - Advice for You
 0:07:00
07-14 - Str Task 1
 0:19:00
07-15 - Cont.Str Task
 0:21:00
07-16 - Cont.Str Task 2
 0:03:00
07-17 - Cont.Str Task 3
 0:08:00
07-18 - Task Delivery
 0:04:00
Chapter 08 - Lecture 819 Lessons
 1:51:00
08-01 - Lecture Introduction
 0:01:00
08-02 - Open Simple Autodesk Projects
 0:06:00
08-03 - Export High quality Image from Revit
 0:04:00
08-04 - Graphical Display Option
 0:03:00
08-05 - Use Camera
 0:05:00
08-06 - Render by Revit
 0:06:00
08-07 - Render by Nano banana
 0:19:00
08-08 - Scale Exported CAD
 0:03:00
08-09 - Presentation by PowerPoint
 0:04:00
08-10 - Presentation by Canava
 0:07:00
08-11 - Notebook LM
 0:11:00
08-12 - Save Presentation From Canva
 0:02:00
08-13 - Q and A Export Lumion
 0:01:00
08-14 - Google Subscription
 0:05:00
08-15 - More Application on AI
 0:05:00
08-16 - Clauda MCP
 0:03:00
08-17 - Task delivery
 0:09:00
08-18 - Create your group
 0:07:00
08-19 - Flow Veo3
 0:10:00
Chapter 09 - Lecture 925 Lessons
 2:33:00
09-01 - Introduction
 0:02:00
09-02 - EJS Project Introduction
 0:05:00
09-03 - Levels
 0:09:00
09-04 - Prepare CAD file
 0:07:00
09-05 - Insert CAD Link
 0:10:00
09-06 - Arabic Issue in Revit
 0:02:00
09-07 - Override CAD layers
 0:02:00
09-08 - Grids
 0:07:00
09-09 - Copy Monitor
 0:06:00
09-10 - Cont.Copy monitor
 0:05:00
09-11 - Structure Start
 0:01:00
09-12 - Workflow
 0:02:00
09-13 - Needed Levels for Structure
 0:13:00
09-14 - nsert CAD Str Col
 0:07:00
09-15 - Create Structure Col Types
 0:05:00
09-16 - Modeling Structure Column
 0:07:00
09-17 - Insert CAD Str Foundation
 0:07:00
09-18 - Create Structure Col Types
 0:09:00
09-19 - PC
 0:04:00
09-20 - Ground Beam
 0:08:00
09-21 - Beam Types schedules
 0:10:00
09-22 - Duplicate Columns through Levels
 0:05:00
09-23 - Beams of Ground
 0:04:00
09-24 - Overview Str modeling
 0:03:00
09-25 - Task Structure Modeling
 0:13:00
Chapter 10 - Lecture 1027 Lessons
 4:10:00
10-01 - introduction Architecture Modeling
 0:04:00
10-02 - pre CAD ground Level
 0:06:00
10-03 - Walls
 0:11:00
10-04 - Floor
 0:07:00
10-05 - cont- Floor
 0:05:00
10-06 - Q and A 1
 0:05:00
10-07 - Q and A2
 0:03:00
10-08 - doors
 0:08:00
10-09 - windows
 0:03:00
10-10 - Stair
 0:10:00
10-11 - Ramps
 0:03:00
10-12 - CAD For First Floor
 0:10:00
10-13 - Modeling Arch of Second Floor
 0:03:00
10-14 - Overview of Complete Modeling of Arch
 0:08:00
10-15 - Task of EJS
 0:02:00
10-16 - Export to PDF
 0:14:00
10-17 - Worksharing Overview
 0:09:00
10-18 - Local Worksharing VS Cloud Worksharing
 0:02:00
10-19 - Local Worksharing Mini Course
 0:03:00
10-20 - ACC License
 0:05:00
10-21 - Payment for ACC License
 0:05:00
10-22 - What’s Is Next
 0:05:00
10-23 - worksharing p1
 0:21:00
10-24 - worksharing p2
 0:21:00
10-25 - worksharing p3
 0:25:00
10-26 - worksharing p4
 0:21:00
10-27 - worksharing p5
 0:31:00
Chapter 11 - Lecture 1123 Lessons
 2:19:00
11-01 - Intro
 0:03:00
11-02 - Standards Intro
 0:05:00
11-03 - Cont.
 0:03:00
11-04 - List Of Abbreviations
 0:04:00
11-05 - Task
 0:02:00
11-06 - Bim Maturity
 0:06:00
11-07 - Task
 0:01:00
11-08 - BIM Uses
 0:03:00
11-09 - CDE
 0:07:00
11-10 - Cont. CDE
 0:01:00
11-11 - Apply CDE
 0:04:00
11-12 - Open BIM Closed BIM
 0:08:00
11-13 - IFC
 0:09:00
11-14 - LOD
 0:10:00
11-15 - Cont.Lod
 0:09:00
11-16 - Cont.Lod 2
 0:05:00
11-17 - Q And A Lod
 0:03:00
11-18 - BIM Implementation
 0:09:00
11-19 - Naming
 0:08:00
11-20 - Q And A
 0:03:00
11-21 - BXP
 0:29:00
11-22 - Task BIM Standards
 0:04:00
11-23 - How To Record
 0:03:00
Chapter 12 - Lecture 1229 Lessons
 2:05:00
12-01 - ACC Introduction
 0:02:00
12-02 - Creating New Autodesk Account
 0:02:00
12-03 - Login to Autodesk Revit
 0:03:00
12-04 - Download Autodesk Desktop Connector
 0:07:00
12-05 - Create ACC Project
 0:03:00
12-06 - 2 Step Verification
 0:06:00
12-07 - Add Members
 0:03:00
12-08 - Member Assign Products
 0:02:00
12-09 - Create CDE
 0:02:00
12-10 - Confirm Shared File
 0:02:00
12-11 - Add Project by Autodesk Desktop Connector
 0:02:00
12-12 - Autodesk Products in Revit
 0:03:00
12-13 - Issues and Solving
 0:07:00
12-14 - Collaborate in Cloud
 0:04:00
12-15 - Create Worksets
 0:04:00
12-16 - Conclusion of All
 0:08:00
12-17 - Create CDE by Autodesk DOCS offline
 0:05:00
12-18 - Relinquish for all Team member
 0:04:00
12-19 - Versions Of Project
 0:08:00
12-20 - Restore history
 0:03:00
12-21 - Linking
 0:05:00
12-22 - Workflow of Linking WIP and Shared
 0:10:00
12-23 - Cont. Workflow of Linking WIP and Shared
 0:03:00
12-24 - Linking in Our Real Project
 0:01:00
12-25 - Architecture Villa Overview
 0:05:00
12-26 - Structure Villa Overview
 0:02:00
12-27 - MEP Villa Overview
 0:09:00
12-28 - Task ACC
 0:05:00
12-29 - Get Offline on Cloud Models
 0:05:00
Chapter 13 - Lecture 1335 Lessons
 4:03:00
13-01 - Setup Acc
 0:10:00
13-02 - BIM Workflow
 0:14:00
13-03 - Prepare Levels CAD
 0:04:00
13-04 - Create Levels
 0:05:00
13-05 - Grids
 0:05:00
13-06 - Collab in Cloud GL File
 0:04:00
13-07 - Create Str File
 0:07:00
13-08 - Collab Str File
 0:10:00
13-09 - Cont. Collab Str File
 0:02:00
13-10 - Create Str Levels
 0:09:00
13-11 - Create Foundation CAD
 0:05:00
13-12 - Create RC Foundation
 0:11:00
13-13 - Create Str Column
 0:06:00
13-14 - Cont. Str Column
 0:07:00
13-15 - Revision Str Modeling
 0:15:00
13-16 - Task Str Vill Modeling
 0:02:00
13-17 - Modeling Str Wall
 0:06:00
13-18 - Tips In Modeling Str Wall
 0:09:00
13-19 - Assign Level Of Rc Foundation
 0:07:00
13-20 - Create Ground Beam
 0:07:00
13-21 - Pc 300
 0:08:00
13-22 - Pc 100
 0:06:00
13-23 - REptae Column and walls
 0:06:00
13-24 - Q And A
 0:03:00
13-25 - Vertical Alignment of Columns
 0:05:00
13-26 - Modeling Ground Floor
 0:16:00
13-27 - Beams Of Ground Floor
 0:14:00
13-28 - Intro Cont- Structure Modeling
 0:03:00
13-29 - Modeling Of Beam First Floor
 0:08:00
13-30 - Modeling Floor -First Floor
 0:05:00
13-31 - CNC
 0:04:00
13-32 - B12
 0:06:00
13-33 - Q and A
 0:02:00
13-34 - Arch Beam 1
 0:07:00
13-35 - Cont- Arch Beam1
 0:05:00
Chapter 14 - Lecture 1423 Lessons
 1:34:00
14-01 - Family Introduction
 0:05:00
14-02 - Extrusion
 0:02:00
14-03 - Assign Material
 0:02:00
14-04 - Cont- Extrusion
 0:02:00
14-05 - Stair By Extrusion
 0:04:00
14-06 - Blend
 0:04:00
14-07 - Dome by Revolve
 0:05:00
14-08 - Sweep
 0:06:00
14-09 - Swept Blent
 0:02:00
14-10 - Table by MIP
 0:06:00
14-11 - Cont- Table by MIP
 0:14:00
14-12 - Void by MIP
 0:09:00
14-13 - Cont- Void by MIP
 0:04:00
14-14 - Task MIP
 0:07:00
14-15 - Loadable Family
 0:02:00
14-16 - Wides and Length
 0:04:00
14-17 - Length and Thickness
 0:02:00
14-18 - Legs
 0:03:00
14-19 - Legs Offset
 0:03:00
14-20 - Organize Parameters
 0:01:00
14-21 - Sweep
 0:03:00
14-22 - Material
 0:02:00
14-23 - Task
 0:02:00
Chapter 15 - Lecture 1524 Lessons
 1:47:00
15-01 - Visibility Parameters
 0:07:00
15-02 - Formula yes or No
 0:02:00
15-03 - Formula Wides to Length
 0:02:00
15-04 - Nested Parameters
 0:07:00
15-05 - Array Parameters
 0:05:00
15-06 - Formula Syntaxes
 0:04:00
15-07 - Family Types
 0:02:00
15-08 - Family Types Advanced
 0:06:00
15-09 - Cont. Family Types Advanced
 0:07:00
15-10 - Over View Door Family
 0:08:00
15-11 - Choose Right template
 0:03:00
15-12 - Door Bar
 0:03:00
15-13 - Door Fram
 0:05:00
15-14 - Door Leaf
 0:04:00
15-15 - Test Door Family
 0:02:00
15-16 - Door relation With Floor
 0:03:00
15-17 - Sill Hight Setting
 0:02:00
15-18 - Door Handel
 0:03:00
15-19 - Visibility in 2D
 0:03:00
15-20 - Door in Plan
 0:04:00
15-21 - Door In Elevation
 0:03:00
15-22 - Model Line in Family
 0:03:00
15-23 - Open Door With Angle
 0:08:00
15-24 - Task
 0:11:00
Chapter 16 - Lecture 1612 Lessons
 1:58:00
16-01 - Strat Arch Project
 0:09:00
16-02 - Arch Wall Workflow
 0:09:00
16-03 - Analysis Arch Floor -First Floor
 0:17:00
16-04 - Isert Cad Link
 0:04:00
16-05 - Create arch Wall
 0:07:00
16-06 - Cont- Arch Wall
 0:15:00
16-07 - Top and Base offset Of Arch Wall
 0:08:00
16-08 - Create arch Floor Finish
 0:10:00
16-09 - VV for Links
 0:08:00
16-10 - Filter
 0:09:00
16-11 - Task
 0:10:00
16-12 - Q and A Sloped Footing
 0:12:00
Chapter 17 - Lecture 1722 Lessons
 1:45:00
17-01 - Introduction Stairs
 0:03:00
17-02 - Stairs Instance Parameters
 0:07:00
17-03 - Modeling
 0:02:00
17-04 - Run Type
 0:07:00
17-05 - End With Riser
 0:04:00
17-06 - Structural Stair Relation
 0:03:00
17-07 - Landing
 0:05:00
17-08 - Convert by Sketch
 0:04:00
17-09 - Other Stair Component
 0:03:00
17-10 - Stair by Sketch
 0:08:00
17-11 - Multi Story Stair
 0:05:00
17-12 - Ramps
 0:10:00
17-13 - Floor As Ramp
 0:04:00
17-14 - Annotation Of Ramps
 0:04:00
17-15 - Railing Structure
 0:04:00
17-16 - Instance Parameters Railing
 0:04:00
17-17 - Railing Structure
 0:05:00
17-18 - Baluster
 0:07:00
17-19 - Railing Samples
 0:06:00
17-20 - Copy to Project
 0:02:00
17-21 - Q and A
 0:06:00
17-22 - Q And A 2
 0:02:00
Chapter 18 - Lecture 1811 Lessons
 1:30:00
18-01 - Extract Stair Data
 0:16:00
18-02 - Create Structure Stair
 0:06:00
18-03 - Cont. Structure Stair
 0:17:00
18-04 - Revision Structure Stair
 0:16:00
18-05 - Create Architecture Stair
 0:13:00
18-06 - Repeating Arch Stair through Levels
 0:02:00
18-07 - Repeat Structure Stair through Levels
 0:03:00
18-08 - Structure Ramps
 0:05:00
18-09 - Architecture Ramps
 0:04:00
18-10 - External Ramp
 0:06:00
18-11 - Task
 0:02:00
Chapter 19 - Lecture 1925 Lessons
 2:00:00
19-01 - Place Doors
 0:08:00
19-02 - Place Windows
 0:05:00
19-03 - Wall Opening
 0:06:00
19-04 - Floor Finish
 0:06:00
19-05 - Wall Finish
 0:03:00
19-06 - Cont.Wall Finish
 0:07:00
19-07 - Room Essentials
 0:06:00
19-08 - Volume in Room
 0:05:00
19-09 - Rooms in Section
 0:03:00
19-10 - Area
 0:03:00
19-11 - Place Room In Model
 0:04:00
19-12 - Place room
 0:01:00
19-13 - Wazarat
 0:07:00
19-14 - Ceiling
 0:08:00
19-15 - False Ceiling
 0:04:00
19-16 - Cornish
 0:07:00
19-17 - Relation with Ceiling with Cornish
 0:04:00
19-18 - Relation Wall with Cornish
 0:01:00
19-19 - Water Jet Floor
 0:07:00
19-20 - Parts
 0:05:00
19-21 - Cont. Parts
 0:03:00
19-22 - Paint
 0:03:00
19-23 - Furniture Workflow
 0:09:00
19-24 - Place Furniture
 0:02:00
19-25 - Task
 0:03:00
Chapter 20 - Lecture 2017 Lessons
 2:14:00
20-01 - Overview Exterior Design
 0:07:00
20-02 - Section Far Clipping
 0:12:00
20-03 - Prepare Section for Exterior Modeling
 0:03:00
20-04 - Prepare Elevation CAD
 0:10:00
20-05 - Insert Elevation CAD
 0:02:00
20-06 - Naming of Exterior Wall
 0:05:00
20-07 - Opening in Exterior Wall
 0:08:00
20-08 - Cont- Opening in Exterior Wall
 0:09:00
20-09 - Cont- Exterior Wall
 0:04:00
20-10 - Basic Wall Coordination
 0:05:00
20-11 - Cont- Exterior Wall 2
 0:11:00
20-12 - Place Arch GRC
 0:15:00
20-13 - Overview Roofs
 0:07:00
20-14 - Roof Modeling
 0:18:00
20-15 - Cont- Other Roofs
 0:11:00
20-16 - Tips and Tricks
 0:06:00
20-17 - Task
 0:01:00
Chapter 21 - Lecture 2131 Lessons
 2:04:00
21-01 - Introduction QS
 0:02:00
21-02 - Fields
 0:09:00
21-03 - Data In Fields
 0:04:00
21-04 - Order Fiels
 0:02:00
21-05 - Filter
 0:03:00
21-06 - Sorting
 0:03:00
21-07 - Get Total
 0:03:00
21-08 - QS of Structure Column
 0:02:00
21-09 - QS of Structure Column Other Levels
 0:02:00
21-10 - Column Neck
 0:04:00
21-11 - QS of Structure Wall Other Levels
 0:04:00
21-12 - Collect in Sheets
 0:03:00
21-13 - QS of Foundation
 0:07:00
21-14 - QS of Fram
 0:04:00
21-15 - QS of Stairs by material Take Off
 0:04:00
21-16 - Material Take off Foundation
 0:02:00
21-17 - QS of Floo
 0:01:00
21-18 - Before QS
 0:06:00
21-19 - Interface Check
 0:04:00
21-20 - QS of Ramp
 0:05:00
21-21 - Export To Excel
 0:06:00
21-22 - Combined Parameters
 0:03:00
21-23 - Add Numbering
 0:02:00
21-24 - Get B and L of Str Column
 0:05:00
21-25 - Cement Qualities
 0:04:00
21-26 - Switch Join In QS
 0:06:00
21-27 - Revision Quantity from Revit
 0:04:00
21-28 - Qs of Model In Place
 0:05:00
21-29 - Transfer schedules to other project
 0:05:00
21-30 - QS from Link
 0:05:00
21-31 - طريقة تسليم التاسك
 0:05:00
Chapter 22 - Lecture 2218 Lessons
 2:00:00
22-01 - Qs Doors
 0:10:00
22-02 - add image
 0:08:00
22-03 - cont- Other QS of counts
 0:01:00
22-04 - Qs wall m2
 0:10:00
22-05 - N of Bricks M2
 0:06:00
22-06 - Qs wall m3
 0:08:00
22-07 - N of Brick M3
 0:01:00
22-08 - QS Sand
 0:06:00
22-09 - Q and A
 0:09:00
22-10 - Ceiling
 0:05:00
22-11 - Elevation
 0:08:00
22-12 - Wazarat
 0:11:00
22-13 - Cranish
 0:05:00
22-14 - Q and A 2
 0:08:00
22-15 - Empty Schudel
 0:03:00
22-16 - Task
 0:07:00
22-17 - Introduction Template
 0:01:00
22-18 - Creating Template Workflow
 0:13:00
Chapter 23 - Lecture 2322 Lessons
 2:21:00
23-01 - Place Algine Dimensions
 0:09:00
23-02 - Dimensions Type Properties
 0:18:00
23-03 - Scaling Dimensions
 0:03:00
23-04 - Linear Dimensions and other Dimensions
 0:05:00
23-05 - What is Task
 0:02:00
23-06 - Arc Lenth
 0:03:00
23-07 - Spot elevation
 0:14:00
23-08 - Spot Coordinates
 0:12:00
23-09 - Cont. Spot Coordinates
 0:04:00
23-10 - Spot Slop
 0:03:00
23-11 - Tags – Column Tag
 0:07:00
23-12 - Cont. Str Column Tag
 0:03:00
23-13 - Discussion
 0:12:00
23-14 - Cont. Diss
 0:04:00
23-15 - Floor Tag
 0:10:00
23-16 - Ceiling Tag
 0:03:00
23-17 - Roof Tag
 0:03:00
23-18 - Grid Head
 0:04:00
23-19 - Level Head
 0:09:00
23-20 - Level Head Advanced
 0:06:00
23-21 - Task
 0:01:00
23-22 - Q and A Transfer Project Standards
 0:06:00
Chapter 24 - Lecture 2421 Lessons
 2:28:00
24-01 - Parameters Type
 0:23:00
24-02 - Conclusion Parameters Type
 0:02:00
24-03 - Str Fram Tag
 0:09:00
24-04 - Section Head and Tail
 0:09:00
24-05 - Divid View Through sheets
 0:08:00
24-06 - Apply Divid View Through sheets
 0:05:00
24-07 - Cont. Apply Divid View Through sheets
 0:11:00
24-08 - Guide Grid
 0:05:00
24-09 - Save Position sheet
 0:03:00
24-10 - Sheets Family
 0:02:00
24-11 - Import CADs and Create Family
 0:10:00
24-12 - Shared Parameters in sheet
 0:06:00
24-13 - Sheet List
 0:03:00
24-14 - Sheet collection
 0:05:00
24-15 - Issue in Revit
 0:12:00
24-16 - Issue Schedule
 0:03:00
24-17 - Sheet Key
 0:05:00
24-18 - Cont. Sheet Key
 0:05:00
24-19 - Material Tag
 0:06:00
24-20 - Keynotes
 0:12:00
24-21 - Keynotes Schedule
 0:04:00
Chapter 25 - Lecture 2535 Lessons
 3:04:00
25-01 - Intro Dynamo
 0:05:00
25-02 - Line
 0:06:00
25-03 - Beam
 0:05:00
25-04 - Save
 0:01:00
25-05 - Apply
 0:03:00
25-06 - Unit
 0:02:00
25-07 - Cont.
 0:02:00
25-08 - Operators
 0:02:00
25-09 - Create Wall
 0:07:00
25-10 - Get Parameters
 0:06:00
25-11 - Set Parameters
 0:04:00
25-12 - Structural Parameters
 0:02:00
25-13 - Boolean
 0:01:00
25-14 - Select
 0:06:00
25-15 - Get ID
 0:07:00
25-16 - Create Shared Parameters
 0:03:00
25-17 - Cont. Create Shared Parameters
 0:06:00
25-18 - Ramps Volume
 0:08:00
25-19 - Cont. Ramp Volume
 0:05:00
25-20 - Organize
 0:08:00
25-21 - Dynamo Player
 0:06:00
25-22 - Run Ramp Volume Script
 0:08:00
25-23 - Nonica Tab Intro
 0:02:00
25-24 - Chat Gpt with Python in Dynamo
 0:15:00
25-25 - Set Type Comment
 0:11:00
25-26 - Dynamo with GPT
 0:04:00
25-27 - Task
 0:03:00
25-28 - Dynamo Addins
 0:07:00
25-29 - Interface
 0:09:00
25-30 - Dynamo Website - Learn
 0:03:00
25-31 - Forums
 0:03:00
25-32 - Road Map -Dynamo Builds
 0:05:00
25-33 - Chat GPT With Dynamo – Upgrade Dynamo Version
 0:07:00
25-34 - Chat GPT With Dynamo – Upper Case View Name
 0:03:00
25-35 - Nonica Tab - Dynamo Player
 0:09:00
Chapter 26 - Lecture 2628 Lessons
 2:49:00
26-01 - Setup Navisworks
 0:09:00
26-02 - Navisworks Soft
 0:01:00
26-03 - File Format
 0:07:00
26-04 - Reading File
 0:03:00
26-05 - Interface
 0:04:00
26-06 - Navisworks Function
 0:06:00
26-07 - Autosave
 0:07:00
26-08 - Open Navis Project
 0:03:00
26-09 - Revit Navis Workflow
 0:02:00
26-10 - Export from Revit Settings
 0:18:00
26-11 - Export from Revit
 0:06:00
26-12 - Import by Navisworks
 0:05:00
26-13 - Append VS Merge
 0:04:00
26-14 - Refresh
 0:05:00
26-15 - Why Merge
 0:01:00
26-16 - Publish
 0:06:00
26-17 - Walk Through
 0:14:00
26-18 - Select and Search
 0:05:00
26-19 - Save selection
 0:04:00
26-20 - Search Sets
 0:09:00
26-21 - Overview Clash Matrix
 0:01:00
26-22 - Visibility
 0:07:00
26-23 - Viewpoint
 0:04:00
26-24 - Appearance Profile
 0:05:00
26-25 - Animation
 0:08:00
26-26 - Review
 0:10:00
26-27 - Task Navisworks Essentail
 0:02:00
26-28 - Render
 0:13:00

Kayan Academy

Kayan Academy is a specialized company in training, technical support, and services for Engineering and Graphics software. Since 2009 till now Kayan Academy has adopted an innovative approach to integrated solutions in CAD & BIM technology by implementing strategies based on commitment, quality, customer satisfaction, and high return on investment. During this period Kayan Academy has expanded its services in Egypt and Gulf. In 2017 Kayan Academy opened its office in Alexandria and Cairo to deliver the most updated services to its customers

Find Us On

Contact Us

+201020819686
+2010 260 89 086
+2011 19 561 245
+2010 17 207 636
+964 784 649 7506
+2015 51 181 765
Info@kayan-co.org
مكرم عبيد - مدينه نصر - القاهرة
https://goo.gl/maps/sk8ikbPv64DwRwEw9
----------------------------------
شارع عدلي يكن- جليم - الإسكندرية
https://goo.gl/maps/7KmDZhoe4bmxkV3Z9
Copyright © Kayan Academy 2026
Powered by ® Teachal